Categories
- Boring14
- Clamp Carrier1
- Clamps6
- CNC Router27
- Complete Operations4
- Compressor7
- Door Equipment3
- Dowel Mill1
- Dust Collection27
- Edgebander28
- End Matcher1
- Finger Jointing1
- Finishing Equipment16
- Foiler1
- Forklift6
- Gang Rip Saw3
- Glue Spreader1
- Gluing1
- Grinders/Hogs21
- Jointer3
- Lathe1
- Liquidation2
- Material Handling13
- Misc3
- Moulders25
- Panel Saw22
- Pin Router1
- Planer16
- Planer/Moulder2
- Post Former1
- Press8
- Printing1
- Profile Grinder5
- RF Gluing1
- Rip Saw18
- Sander20
- Saw23
- Saw Chop7
- Saw Optimizing2
- Saw-Resaw24
- Shaper5
- Sharpening/Grinding5
- Stone2
- Tenoner4
- Veneer4
Pneumafil 11.5-320-12 Dust System
Southeast USA
- Pneumafil model 11.5-320-12 reverse air dust collector - (2) Units available - Each unit has 4800 sq ft of cloth and can handle 30000-45000 CFM of air - 15- HP Fan - Kice 20x16x16 airlock - Like ...
2016 Felder RL350 Dust Collector
Southeast USA
This system will be available around mid-September 2020. Specs are listed with photos. 230 volt
Pneumafil & Dixie Dust Collection System
Northeast US
Pneumafil Dust Collector Model 135 (13.5-460-8): 150 hp. The round duct enters the collector at 48" Diameter. Dixie Air Dust Collector: Size: 108-12, Type: SPB, 50 HP, Inlet to the motor, circumfe...
Donaldson Torit CYD 3015 Dust Sytem
Wisconsin
There are (3) systems available. - 15 HP Motor - (8) Bag Filters - Barrel with drum cover - Disconnect
2017 Nederman NFPS-70 Dust System
West Coast, USA
- 7.5 HP Motor - 220/440 V 3-Phase - Dust Bin - Approx 2500-4500 CFM - Inlet 10"
DIXIE AIR 201-RH
New York
The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumfe...
UNKNOWN WASTE AUGER
Southeast USA
This Auger came out of a dust system and was needed in the new application. - 36' Long - 12" Diameter Auger - Metal Frame Stand
PNEUMAFIL MODEL 13.5-460-8
New York
The seller of this Pneumafil dust collection system has confirmed that it is in great working/running condition and ready to be loaded! - 150HP - Round duct enters the colletor at 48" diameter
MAC 55,000 CFM Dust System
United States
Ready to be removed from the current location: MAC Dust System 200 HP main Fan Drive motor 55,000 CFM 465 bags Includes the auger distribution overhead truck loading system Includes the conspec sys...