Weeke BHX-055 CNC

Weeke BHX-055 CNC


Northeast

This machine is still under power and ready to load. Weeke BH-055 HSK CNC Machining Center Vertical CNC machining center for drilling, grooving & routing Excellent machine for cabinet and closet pa...

Biesse Rover G 6.12 CNC

Biesse Rover G 6.12 CNC


Europe

This machine has been gone through and is ready to ship. Automatic loading system YES Working dimensions X mm 3765 Working dimensions Y mm 1875 Working dimensions Z mm 160 Vertical router 3 axis Au...

Laguna LD4

Laguna LD4


Southwest USA

This machine is no longer needed at the current facility. Specs Power 208v-220v, 1 Phase, 30 Amps 96″ maximum work zone Footprint 82″ H x 45″ W x 135″ L 3-axis control for positioning Weight 6,000 ...

Felder C-Express 920 Classic CNC

Felder C-Express 920 Classic CNC


North Carolina

This machine is being no longer needed fro the current application. It is available immediately. Manufacturer specs (to be confirmed) Compact CNC machining on 3.4 m² High-precision 15-spindle drill...

SCMI 5-Axis CNC Router

SCMI 5-Axis CNC Router


Southwest USA

This machine has low hours and is ready to ship. 2006 SCMI Record 110 Working capacity "X" axis 240.5" (6,110 mm), "Y" axis 51.4" (1,306 mm), "Z" axis stroke 17.3" (440 mm), 7.8" (200 mm) max. mate...

Cosmec 4x8 and 5x10 CNC Routers

Cosmec 4x8 and 5x10 CNC Routers


South Coffeyville, OK

Both machines were under power when removed from service. Seller has put in new equipment and these are in storage. Taking offers on both machines together. (1) 4' x 8' with vacuum pump (1) 5'x10' ...

1994 CMS NC PF2-2100 CNC Router

1994 CMS NC PF2-2100 CNC Router


North Carolina

This CNC will be available around September 1, 2020.

Weeke Profiline BHC 500 CNC

Weeke Profiline BHC 500 CNC


South, USA

This system is used daily and available for inspection. Manufacturer specs (to be confirmed) WEEKE CNC MACHINING CENTER LINE Including Bargstedt Type Optimat TSH200 Panel Unstacker/Feeder - Panel L...

Komo Innova Mach I

Komo Innova Mach I


South, USA

This machine will be available by the end of September, 2019. Owner is upgrading to a larger CNC router. 5' x 10' Table 12 HP Spindle Vacuum Pump 8-Position Tool Changer Voltage: 480V, 60Hz, 3Ph

Thermwood 5' x 10' CNC

Thermwood 5' x 10' CNC


Fayetteville, NC

There are (2) machines available at this facility. 5'x10' - Two 5' x 5' Tables