2018 Homag Edgeteq S300 Edgebander

HOMAG EDGETEQ S-300 EDGEBANDER

Edgebander model is HOMAG EDGETEQ S-300, OPTIMAT KDF 440C

Conveyor model is Homag Loopteq Return

This unit was just removed from service and is in storage. READY TO SHIP!

Specifications (to be confirmed):

• 0.4 - 8 mm (0.016 - 5/16") edge
• 8 - 60 mm (5/16 - 2-3/8") panel thickness
• 160 mm (6-3/8") min. panel length and 70 mm (2-3/4") min. panel width.
• Equipped with: Pre-Milling Station, (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges
• .Equipped with diamond cutter heads.
• In-feed Fence, with servo motor positioning.
• Infrared Radiant Quartz Heating Unit between glue roller and pressure section.
• Automatic Edge Magazine, for strip & coil stock, strips 0.4 mm - 8 mm (0.016 - 5/16"), coils up to 3 mm PVC and "HD" guillotine.
• "Quick Change" Glue Tank for maintenance & glue color change.
• Pressure Section, 1st. roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover.
• Feed Speed, variable 8 - 14 MPM. (26 - 46 FPM), 11 MPM (36 FPM) when using contour trimming.
• HOMAG "Power Touch Control, Memory: 256 MB Ram, 1 GB Flash Card Drive.Operator control panel w/22" color HD wide screen, soft keypad & internal modem for remote diagnostic link.
• Workstations: End Trimming: - (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°.
• Flush/Bevel-Fine/Radius Trimming Unit: - Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, auto tilt positioning 0° - 25°, with combination flush/radius/chamfer cutterheads.
• Horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work-unit & horizontal copy wheels for quick changeover.
• Includes (3) positioning options, profile 1, profile 2, and flush trimming, and nested top copy system.
• Corner Rounding Unit: (1) Motor 0.35 kW (1/2 HP) 12,000 RPM, with manual adjustment for 1-mil, 2-mil & 3-mil thickness.For leading & trailing edges vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness.
• Scraping, Multi-Profile (PVC): Top/bottom with (2) profiles. 1 mm and 2 mm or 3 mm instead of 2 mm, servo control positioning of vertical & horizontal copy wheels. PVC scrape collection box.
• Scraping Glue Unit: - Flush top/bottom on panel surface with floating insert knives.
• Buffing Unit: - Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM.
• Complete with:Motorized, programmable hold-down pressure beam; padded sound enclosure, isolation transformer for multiple input voltages, used tooling and Original Factory machine documentation.