2020 Weinig Powermat 1500 Moulder with R960 Grinder

Weinig Powermat 1500

2021 Weinig R960 Knife Grinder

2021 Weinig Opticontrol Digital Measuring Stand

Includes: Misc parts & accessories, approx $30k in Powerlock Heads and Powerlock Spiral Heads

Powermat 1500:

The machine is fully cnc controlled(axial and radial), VFD controlled motors, and all are Oowerlock except for the first bottom head. It is also a 12,000rpm machine on heads 2-6, 8000rpm on the first bottom.

Weinig R960 Powerlock:

An entire knife making cell consisting of a Weinig R 960 powerlock (with options for processing carbide and other things), Weinig Opticontrol Digital tool measuring system with tool room link.

Full specification of moulder below:

FLA 214 at 460V 

Main fuse 250amps 

Total connected load 128KW

Remote Lock out / Tag out  

Switch cabinet and operating panel separate from machine  

Cooling device for switch cabinet

Straightening table, 2 m long  

Automatic Waxilit pump

Working width 230 mm x 160mm High  

Feed roller in front of 1st bottom spindle pneumatic "up-down"

FEED SYSTEM: Motor 7 KW (9.5 HP)/ 5 - 40 m/min  

CNC-controlled adjustment and positioning of feed up/down  

Lateral pressure roller at the infeed table, spring-mounted

FIRST BOTTOM: Motor 11 KW (15 HP) / 1 13/16" / 8000 rpm  

WITHOUT rebate facility and WITHOUT rebate cutter / Digital manual radial adjustment 

RIGHT VERT: Motor 11 KW (15 HP) / PLock / 4000- 12000rpm  

Pressure roller from above, pivoting, spring loaded  

Axial / Radial CNC-controlled adjustment and positioning  

LEFT VERT: Motor 11 KW (15 HP) / PLock / 4000- 12000rpm  

Vario hood (2 axes)  

Pressure shoe in front, 2 lateral pressure rollers, spring-mounted  

150 mm pendulum arbor extension  

Pressure roller from above, pivoting, spring loaded  

Axial / Radial CNC-controlled adjustment and positioning  

FIRST TOP: Motor 22 KW (30 HP) / PowerLock / 4000- 12000 rpm  

Vario Hood (2 axes)  

Axial / Radial CNC-controlled adjustment and positioning  

Prepared for cassette system  

SECOND TOP: Motor 30 KW (40 HP) / PLock / 4000- 12000rpm  

Vario hood (2 axes)  

Axial / Radial CNC-controlled adjustment and positioning  

Prepared for cassette system  

LAST BOTTOM: Motor 22 KW (30 HP) / PLock / 4000- 12000 rpm  

Axial / Radial CNC-controlled adjustment and positioning