DiscMaster Orbital Sander

Machine ID: 007553

Year Mfr: 2006

Condition: Good Condition

Location: Canada

Voltage: 480V, 60Hz, 3Ph

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

Manufacturer specs (to be confirmed):
16 sanding discs 250mm (10”)
Rotating Roller Spindles:
Two spindles 90° to the feed, spindle
diameter 50mm (2”), for maximum
brush diameter 400mm (16”)
Basic Machine:
• Spring loaded hold down rollers for holding down
narrow work pieces, pre-adjustable in height, linked to
height adjustment of spindles
• Through feed by feed belt with variable speed 3-
15m/min (8-50 ft/min) by gearmotor 1.5 kW (2HP)
• Automatic centering of feed belt, pneumatically
• Constant height of through feed, possible to put
machine in finishing line
• Maximum height of work piece 100mm (4”)
• Motorized height adjustment of sanding units by
gearmotor 0.37 kW (0.5HP)
• Electronic digital display for showing height of work
• Sensor activated pneumatic oscillating blowing device for cleaning the work piece at the end of the
• Antistatic brush strip device
• Control panel at left side
• Emergency off pull line at infeed and outfeed
• Infeed control with emergency stop if work piece is too thick
• Emergency off by opening doors
• Switch manual/automatic (start machine from control panel or from finishing line)
• Dust extraction outlets 3 x dia. 80mm (3.2”) (blowing device), 4 x dia. 140mm (5.6”) (rollers) and 1 x
dia. 200mm (8”) (vacuum)
Technical Data:
Max. working width 1350mm (53”)
Max. thickness of work piece 100mm (4”)
Motor disc station 2x1.5kW, 50-350rpm
Motor sanding roller 2x2.2kW, 14-350rpm
Diameter sanding roller Max. 400mm (max. 16”)
Speed of feed belt 3-15m/min (8-50 ft/min)
Length/width 2980mm/2150mm (118”/86”)

Manufacturer LOWER
Model DiscMaster Orbital Sander
Year 2006
Voltage 480V, 60Hz, 3Ph
Machine Location Canada