KD 67C

Machine ID: 007517

Year Mfr: 1999

Condition: As Taken From Service

Location: Southeast USA

Voltage: 208/220V, 60Hz, 3Ph

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This machine is still inservice and available for inspection.
Automatic height adjustment with top pressure beam for all work stations.
Equipped with digital height indicator.
NC-01 integrated electronic line control system for increased reliability and diagnostic assistance.  No limit switches used for setting operating units.
Signal light at infeed to insure proper spacing of panels and error reduction at band infeed.
Control panel located at machine infeed for operator convenience.
Universal automatic magazine for strip and coil feeding.
Extended infeed fence for easier feed of long workpieces.
Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC.
Hot melt granulate glue application system with approximately twelve minute heat-up time.
Quick-change glue tank for easy maintenance and glue color change, if necessary.
Reversible rotation of glue application roller.  Retractable glue roller.
Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
First pressure roller driven and two idle pressure rollers.
Double motor end trimming unit with straight and chamfer capability.  Chamfer up to 15∞.
Top and bottom fine trimming unit with digital “Quickset” system.  Tilt range 0 - 15∞.
Top and bottom contour trimming unit for profile corner trimming.
Sound enclosure with centralized dust extraction outlet.
Scraping unit for rigid PVC edges. 
Top and bottom buffing unit.
Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
Technical Specifications

Edgeband thickness
0.4 – 6 mm (0.016" - .20") (1/4”)
Coil cutoff maximum
0.8 x 45 mm
3.0 x 45 mm (PVC)
Edgeband height
12 - 45 mm (1/2" – 1 ¾ ")
Panel length min.
160 mm (6 3/8")
Panel width min.
65 mm (2 3/8")
Panel thickness - min.
  • max.
8 mm (5/16") 
40 mm (1 3/4")
Feed speed
11 m/min (36 FPM)
Feed motor
2.2 kw (3 HP)
Pressure section
First roller driven, two rollers idle
End trim unit - two motors
     Cutting speed
     Straight cut max.
0.18 kw (1/4 HP)
12,000 RPM
5 x 45 mm (3/16" x 1 3/4")
Fine trimming unit
     Tilting range
     Cutter speed
.27 kw (1/3 HP ea)
0 - 15∞
12,000 RPM
Profile trimming unit - top and bottom
0.3 kw (1/2 HP ea - two motors)
Electronic frequency changer
3.0 kw
Total power required
6.2 kw
Amperage @ 230
                 @ 460
40 amps
20 amps
Machine length
5100 mm (16'8”)
Machine width
1730 mm (68")
Working height
900 mm (35.5")
Total height
1600 mm (63")
Machine net weight (with all stations full)
1750 kg (3850 lbs)

Manufacturer Brandt
Model KD 67C
Year 1999
Voltage 208/220V, 60Hz, 3Ph
Machine Location Southeast USA