Giben
KS26J Edgebander

Machine ID: 007459

Year Mfr: 2012

Condition: Good Condition

Location: Southeast USA

Voltage: 480V, 60Hz, 3Ph

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This machine was removed from service and is ready to be delviered.  Installation can be included!

  • PLC Control with 7" touchscreen
  • Veneer and coiled PVC: 0.4 - 3 mm thick
  • High pressure laminates and wood strips: Up to 8 mm thick
  • Pre-Mill:   Functions: milling of the panel side to be edge banded, with removal from 0 to 1 mm of thickness.  Equipment: two jumping head motors (0.75Kw – 12000 rpm – 200Hz), fixed on sliding machined surfaces with movement on prismatic guides; two diamond cutters, with opposite rotation in order to avoid chipping and obtain a perfect finishing; numerical indicator for removal adjustment; tools protection guards; two dust collection openings.
  • Glue Applicator and Automatic Magazine Unit:  Functions: Automatic loading of edgebanding material in rolls or strips and applying glue onto the panel.Equipment: automatic feeding for the loading of edges in strips (with needle roller) or in rolls (with rubber roller); glue pot for melting with fast heating within 10-15 minutes; application roller with device to adjust the glue quantity that is applied on the panel; dual digital electronic control of the temperature in the tank and on the roller; setting of temperature of working pause at 130°; system equipped with quick change adapters for fast change out.
  • End Cutting Flush Trim Unit:  Functions: cutting of front and back surplus edge.Equipment: two motors (0,25 Kw – 12000 rpm – 200Hz), fixed on sliding machined surfaces with running on prismatic guide; two circular saw blades, 70 mm of diameter; variable plunge speed for automatic adjustment of the speed according to panel feeding;device for blades tilting at 0° and 9°; easy system to adjust the material removal; two dust collection openings. Blade angle is adjustable from the control cabinet (two position).
  • Top & Bottom  Trimming Unit:  Functions: trimming of top and bottom of applied edge.Equipment: two motors (0.37 Kw – 12,000 rpm – 200Hz), fixed on sliding mounted ways running on prismatic guides; device for quick connect motors removal for a fast replacement of the tooling; two cutters, 70 mm of diameter, with knives with 2 shapes (selection between Flat +30°; Flat 5°+R3; FLAT 5°+R2; numerical indicators for easy and quick adjustments; dust collection openings.
  • Corner Round Unit:  Functions: upper and lower trimming of edge applied onto straight panels with upper and lower rounding of edge applied onto post-formed panels.  Equipment: two motors (0.37 Kw – 12,000 rpm – 200Hz), fixed on sliding blocks with running on prismatic guides; device for quick connect motors removal for a fast replacement of the tooling; two cutters, 60 mm of diameter, 6 knives with 1 profile (R3, R2, R1, 5), for edge rounding.
  • Edge Finish Scrape Unit:  Functions: perfect finishing of PVC and ABS edges, after trimming unit working. When using the flat edge of the tools, the unit can also work as Glue –Scraper.Equipment: two knives with profile matching the multi-function unit.
  • Glue Finish Scrape Unit
  • Buffing Polish Unit
 
 
Min/Max Edge Roll Thickness: 0.4 - 3 mm
Min/Max Edge Strip Thickness: 0.6 - 8 mm
Panel Thickness: 8 - 50 mm
Min Panel Width: 85 mm
Min Panel Length 140 mm
Feed Speed: 16 m/min
Glue Pot Capacity: 3 liters
 

Manufacturer Giben
Model KS26J Edgebander
Year 2012
Voltage 480V, 60Hz, 3Ph
Machine Location Southeast USA