Brandt
Ambition 1220 FC

Machine ID: 007425

Year Mfr: 2009

Condition: Good Condition

Location: South

Voltage: 230V, 60Hz, 3Ph

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This machine has been run in a small shop and serviced by Stiles.  It is being removed form service for a new machine.  It will be under power until mid-September, 2018.
Manufacturer specs: 

  • LCD Display
  • Electric Line Control
  • Feed speed: 10 meters/minute (33 FPM)
  • Automatic height adjustment with top pressure beam for all work stations
  • Equipped with digital height indicator for setting up upper pressure beam
  • Lage coil table (800 mm)
  • Joint trimming unit
  • Automatic magazone for stip and coil feeding
  • Panel pre-heater for achieving optimal bond quality
  • Hotmelt granulate gluue application system with approx 12-minute heat up time
  • Reversible glue roller application
  • Strengthened pre-cutter for cutting 3 mm PVC from coil
  • Adjustable infeed fence
  • Joint trimming unit with (2) diamond cutter heads
  • Double motor end trim unit with straight and chamfer capability
  • Top and bottom fine trim unit equipped with DFC cutter heads, quick tilt feature and combination radius/straight carbide inserts
  • Single motor contour trimming unit
  • Profile scraping with pneumatic indexing
  • Buffing unit with (2) cloth discs
  • Edgeband - Strips: 0.4 - 6 mm.  Coil: 0.4 - 3 mm
  • Panel length min: 140 mm
  • Panel width min: 70 mm
  • Panel thickness: min 8 mm, max 60 mm
  • horizontal positioning via electro-pneumatic control
  • dust extraction hood included with 120 mm diameter outlet ( 4 3⁄4 “ )
  • diamond cutter heads
    Automatic Magazine for Strip and Coil Feeding
  • large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC coils
  • edge strip capacity from 0.4 mm to 6 mm (0.016” – 1/4”)
  • direction of glue roller reversible
  • glue roller section is also retractable from fence line
  • one large driven pressure roller with pneumatic pressure control
  • two secondary rollers, all with controlled side pressure
  • setting of pressure zone equipped with digital counter accurate to .1 mm (.004")
  • strengthened pre-cutter for cutting thick PVC edges from the coil; maximum 3 x 45
    mm
    Standard Gluing System
    • heat-up time is twelve minutes
    • no lubrication is needed for this unit.
    • quick-change glue tank for easy maintenance and glue color change, if necessary
    • automatic temperature reduction if not run within 15 minutes. This feature lowers
      the temperature automatically by 50 degrees C.
Joint Trimming Unit
  • pre-trimming of the work piece edge prior to gluing
  • two motors, 3 HP each, 12,000 RPM
  • one motor clockwise rotation, one counter-clockwise
  • vertical spindle adjustment via digital settings

Manufacturer Brandt
Model Ambition 1220 FC
Year 2009
Voltage 230V, 60Hz, 3Ph
Machine Location South