This machine is part of a liquidation. See me in "Panel Processing Machinery"
This system is still under power and available for inspection.
- Working Dimensions: Length - 5500 mm (216"), Width - 1300 mm (51")
- 15 HP HSK Electrospindle: Constant duty liquid cooled electrospindle with oversized 3" diameter arbor and ceramic bearings. (2) Square guides mounted in teh Z-axis, 1,500-18,000 RPM
- 10-Tool Changer: On board tool changer
- Grooving Saw: 3 HP, 200 mm Blade, width 7 mm, 6,000 RPM
- Drilling Unit: 38-Spindles, Vertical spindles are spaced on 32 mm center, each spindle can be individually programed and actuated, 14-spindles in X-axis, 16 spindles in Y-axis, 3 +3 independently controllable horizontal spindes in X axis, 1 + 1 independently controllable horizontal spindle in Y axis, 4 HP Motor, 3,000-6,000 RPM
- Tubeless Vacuum Hold Down System: Total of 12-trays with (4) vacuum cups on each tray
- Working Zones: Worktable is equipped with a total of (8) pop up side stops for fields ABCDIKL creating up to (8) work zones. In addition, each tray has (2) pop up back stops (24 total) and (12) split panel lifting rails for load/unloading of large panels.
- Vacuum Switch: Knee activasted for 4/8 working areas: The switch can be activated with the knee allowing the operator to have use of both hands to load/unload
- Boring Pattern Dimensions: 1220 mm (48")
- Router Working Dimensions: X axis - 5500 mm (216"), Y axis - 1385 mm (54")
- Positioning Speeds: X and Y axis - 40 meters/minute (131'), Z axis - 22.5 meters/minute (74')
- Panel Passage: 180 mm
- Z axis stroke: 280 mm (11')
- Dust Collection required: 2500 CFM
- Centralized dust collection area
- Vacuum Pump
- Remote Control
- Symentec PC Anywhere, XILOG Operator Interface, air conditioned cabinet
- Approx weight: 15,400 lbs
|Model||Author 655 S|
|Voltage||230/460V, 60Hz, 3Ph|