Biesse
Akron 845

Machine ID: 006456

Year Mfr: 2007

Condition: Good Condition

Location: California

Voltage: 230V, 60Hz, 3Ph

Contact: Matt Joyner
704-288-1904 Ext: 111
Submit an Inquiry on this product

This Biesse Polymac Akron 845 is an automatic, single-sided industrial edgebanding machine that is for the application and processing of flat edge-banding material in rolls (melamine, PVC, ABS, veneer) and in strips (solid wood, Formica, planed veneers). The seller has confirmed that this machine is in great working/running condition and it is ready to load!

  • NC control and command system
  • Glue container and glue spreading roller. The spreading roller is complete with a copying system to apply the correct amount of glue to the panel.
    • TEKNO GLUE System
  • Automatic Edge feeding system
  • Cutter knive for the automatic cutting of edge banding material in rolls with a max thickness of 3mm and a max section of 140mm2.
  • Edge pressing system
    • (1) large diameter motorised roller with clutch and independent pneumatic pressure adjustment
    • (5) idle rollers with 60mm diameter and coated with non adhesive material w/ pneumatic adjustment
  •  Panel height : from 10 to 60 mm
  •  Height of edge-banding material : from 14 to 64 mm 
  •  Thickness of edge-banding material in rolls : from 0.4 to 3 mm
  •  Thickness of edge-banding in strips : from 0.4 to 15 mm (depending on the units selected)
  •  Panel protrusion from track : 25 mm
  •  Min panel length : 140 mm
  •  Min panel width (with length 140 mm) : 85 mm
  •  Min panel width (with length 250 mm) : 50 mm
  •  Track feed speed : 10 -14 - 20 m/min.
  •  Gear motor : 4000 W
  •  Centralised dust  extraction for operating units : 1 hood Ø 200 mm 
  •  Dust extraction for glue fume removal : 1 hood Ø 80 mm
  •  Dust extraction system for pre-milling unit : 1 hood Ø 120 mm
  •  Pneumatic connection : 7 bar
  •  Working voltage : 400V /50Hz three phase + neutral
  •  Control voltage : 24 V - DC   
  •  Static frequency inverter : 200 Hz
  •  Glue container capacity : 3 Kg (approx.)
  •  Glue container heating time at ½ load : 10 minutes (approx.)
  • Panel height with corner rounding unit : 10 to 35/60 mm (depending on  profiles)
  • Pre melt unit QM701 for EVA hot melt glue
    • Granulated glue container w/ capacity of approx. 5 Kg.
    • Pre melt unit
    • Small capacity glue container replacing standard one
    • Outlet for rapid draining of the granulated glue container
  • Premilling unit w/ Widia cutters H=75mm. Space required mm500
    • This rectifies the face that has to be edged before applying the glue
    • Produces a flat, even surface ideal to apply the proper amount of glue with a thin glue line
    • Chip free finish
  • End trimming unit - sliding on 2 linear 30mm guides
    • Space required: 750mm
  • Multi positions pneumatic tilting of end trimming motors in (4) positions
  • Dust extraction system for end trimming unit
  • 1st tilting top and bottom trimming unit
  • Multifunction 2 motors corner rounding
    • Space required: 900mm
  • Edge scraper
  • Glue scraper
  • Brushing unit
  • Dust collection hoses are being replaced before sale
 
 

Manufacturer Biesse
Model Akron 845
Year 2007
Voltage 230V, 60Hz, 3Ph
Machine Location California