Custom Built
Pallet Stock Line

Machine ID: 006136

Year Mfr:

Condition: "As Is, Where Is"

Location: Pacific Northwest

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

General Information: All of this system is built with heavy structural steel tubing, adjustable legs for uneven ground, sealed ball bearings on oversized shafting, quality hydraulic motors of standard interchange design. Hydraulic pressure and return lines are mandrel bent and follow the machinery layout for minimal pressure drop. This machinery is built to last. 
TRIMMER with infeed, conveyors and dust collection manifold:

  • 20' Machine with (6) saws set to trim 2"x2" - 2"x6" lumber
  • 7.5 HP Motors on each saw with 22" carbide blades
  • Each saw has quick adjustment feature to minimize downtime
  • Built in transfer chain with hook stops, limit switch and photo cells for automation
  • Built in pinch roll system with even end verification to ensure zero end trim
  • (7) Star wheels with square bottom position under saw blades for cut lumber
  • Currently has adjustable stops for 36-7/8", 39-7/8" & 47-7/8" board lengths
  • Control panel is mounted on a swing arm and controls everything from the breakdown hoist through the outfeed conveyor.
  • Lumber discharge belt and waste belt mounts under the machine and are hydraulically driven
CHAMFER machine:
  • Heavy plate steel construction with access doors
  • (2) 7.5 HP 3600 RPM motors with grease lock arbor adapters
  • Fixed lower head and moveable top head with grease lock moulder heads
  • Removable polished steel bed plate and straight edge guides material through the machine
  • Fixed vertical feed rolls and outside spring loaded feed rolls
  • Upper spring loaded hold down shoe prior to top head to eliminate chatter
  • Free standing control panel
  • Aluminum belt conveyor raises up for service
TURNER RESAW with soft start and spare blades:
  • 48" Turner resaw with (4) hydraulic powered feedrolls on standard tipping table
  • 50 HP Main motor with new belts and drive sheave; set for 9,000 RPM blade speed
  • New soft start and local disconnect
  • Air cylinder actuated feed roll "quick open" with remote control
  • All new bearings, bushings and seals throughout the machine
  • New style saw guiddes for "no tool" replacement
  • New paint and guards
  • Splitter conveyor: 4' x 16" mounts close to the saw blade, tall steel center rib behind the saw blade for separation, powered by hydraulic motor with flow control and ball valve
  • Long belt conveyor: 10" Wide x 8'10" long with 5.5" tall sides, powered by hydraulic motor, flow control
  • #1 #2 Landing tables: (3) Lines of camel back chainin plastic channel, 4' shaft centers, 39" top of chains, angled landingguide plates with debris shoots, moveable backstop for centering several lengths of material, overhead squaring device, hyradulic motor with flow control
  • #1 and #2 Grading chains: (2) Lines of C-2060 conveyor chain riding in plastic channel spaced 24" apart, 10' 9-3/4" shaft centers, top of chain elevation is 36" (3" lower than landing table:, hydraulic motor with flow control, head end is contstucted to accept tail idlers for an inclideto future stackers

Manufacturer Custom Built
Model Pallet Stock Line
Machine Location Pacific Northwest