Bliss
#200-120

Machine ID: 006055

Year Mfr: 2006

Condition: As Taken From Service

Location: Midwest

Voltage: 460V, 60Hz, 3Ph

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

These (2) units were recently taken offline. This equipment was installed new in 2006 and removed in September of 2015. All equipment was maintained and is reported to be in good running/working condition. Seller was producing about 4TPH of dense hardwood pellets per mill and running everything through the included cooling system. 
 

(2)

Bliss B200B-120 Bliss Pioneer Pellet Mill
  • Two Stage Belt Drive Transmission with HTD belt drive from two pinion shafts to main shaft & (2) V-belt drives from motors to pinion shafts with Automatic tensioning on V-belt drives.
  • (2) ea. 250 HP (500 total HP) V-belt drives with safety shields.
  •  (3) ea. Cut-Off Knives, [1] ea. Integral Die Hoist (electrically operated), quick dump by-pass feed chute in door (manually operated), 10 GA 304 SS hinged pellet chamber door.

(2)

Automatic System on Feed Chute Dump Gate

(2)

Auto Lube System on main shaft bearings and rolls

(2)

16” Long Wedge Magnet
  • In Feed Chute between Conditioner and Die
  • Quick clean 14 ga, 304SS Sleeve over Wedge Magnet

(4)

250 HP Main Drive Motors                                                                                                            
  • 3/60/460
  • TEFC
  • 1200 RPM with roller bearings

(2)

Hydraulic Brakes on main shaft with hydraulic pump

(2)

Sets of Vibration Pads

 

 

 

Dies and Roller Shell Assemblies Not Included

(2)

Model FC-1884 Feeder / Conditioner

Feeder

  • 12” diameter x 72” long, 304 SS
  • 2 HP motorbase, 3/60/460, TEFC enclosure motor, drive and safety shield

Conditioning Chamber

  • 18” dia x 84” long (conditioning chamber, shaft and paddles of 304SS)
  • 4” dia steam inlet
  • 1” dia liquid inlet
  • 10 HP motor base and V-blet drive with safety shield and shaft mount reducer for 85 final RPM on conditioner shaft

(2)

10 HP Motor for Conditioner
  • 3/60/460, 1800 RPM, TEFC

 

Thermometer
  • 50-300° F

(1)

Bliss Cooler Model 10-202-6A
Large enough for 2 Pellet Mills
  • 304 SS Top and Walls with Mild Steel Construction on fixed grid and louver discharge
  • Hinged Service Door
  • (2) Inspection Windows
  • Fixed Grid
  • (3) Rotary Level Sensors
  • Air Management Ring
  • Louver Discharge operated by (1) Air Cylinder
  • Standard 45° Mild Steel Discharge Hopper with bolted service panel

(1)

Cyclone

(1)

Rotary Airlock Feeder

(1)

Fan
  • 75 HP
  • Stainless Steel Construction

Manufacturer Bliss
Model #200-120
Year 2006
Voltage 460V, 60Hz, 3Ph
Machine Location Midwest